Author Topic: New vLSO (Christmas edition) - EDIT  (Read 29531 times)

Paddles

  • Hero Member
  • *****
  • Posts: 721
  • Lurking around
    • vLSO blog
Re: New vLSO (Christmas edition) - EDIT
« Reply #30 on: January 19, 2017, 06:37:15 pm »
I installed 0.9.8.8 version. Still getting same message.

It's almost the same. I'd like to know what exactly says that message?

Suggestion: When on the Config screen and in the Flight Sim box and you choose the sim to use to set configuration have the chosen sim become the default instead of defaulting to FSX.

Do you mean when opening the Config once again it should default to the last chosen sim, right?
Want it done right? Do it yourself!


rsgunner

  • Newbie
  • *
  • Posts: 48
Re: New vLSO (Christmas edition) - EDIT
« Reply #31 on: January 19, 2017, 06:49:34 pm »
This is the error message.


"EStringListError error raised, with message: List Index out of bounds(127535)"


Do you mean when opening the Config once again it should default to the last chosen sim, right? Yes.


Russ
Many may fly and some are rewarded
handsomely, but the wings of gold of a
United States Naval Aviator mean more
than flying. It is dearly bought, requires
sacrifice to keep and represents a way of life.

Paddles

  • Hero Member
  • *****
  • Posts: 721
  • Lurking around
    • vLSO blog
Re: New vLSO (Christmas edition) - EDIT
« Reply #32 on: January 20, 2017, 04:43:09 am »
Russ,
Most likely the error occurred when the program tried to crop its log file. Try to delete the vLSO_log.txt file in the vLSO folder and start the program again.
« Last Edit: January 20, 2017, 07:15:52 am by Paddles »
Want it done right? Do it yourself!


rsgunner

  • Newbie
  • *
  • Posts: 48
Re: New vLSO (Christmas edition) - EDIT
« Reply #33 on: January 20, 2017, 02:39:42 pm »
Paddles

Deletion of the vLSO_log.txt eliminated the error.

Thanks

Russ
Many may fly and some are rewarded
handsomely, but the wings of gold of a
United States Naval Aviator mean more
than flying. It is dearly bought, requires
sacrifice to keep and represents a way of life.

Paddles

  • Hero Member
  • *****
  • Posts: 721
  • Lurking around
    • vLSO blog
Re: New vLSO (Christmas edition) - EDIT
« Reply #34 on: January 20, 2017, 06:26:58 pm »
Thank you, Russ!
Want it done right? Do it yourself!


Fryman

  • Newbie
  • *
  • Posts: 19
Re: New vLSO (Christmas edition) - EDIT
« Reply #35 on: January 22, 2017, 06:17:20 pm »
Two items:
1. On a previous post about Pilot files, I had installed vLSO under C:/Program files/vLSO. The new installer put vLSO under C:/vLSO and so the pilot log file was empty. For the latest version I browsed to C:/program files/vLSO and the last pilot log file came in.
2. I have been trying to get the RFN gauge to work and have not been successful. My system is P3D latest version, vLSO 0.9.8.8. I have RFN installed on a separate hard drive and vLSO shows a red light with no RFN. This last version is to support different directories for sim objects but was not tested in P3D. Is there something I can check to see why it is not showing up?

PhantomTweak

  • Hero Member
  • *****
  • Posts: 600
Re: New vLSO (Christmas edition) - EDIT
« Reply #36 on: January 22, 2017, 09:42:18 pm »
First and foremost, do NOT install things other than Windows file to c:\Program Files or \Program Files(X86).
It will give you nothing but trouble. Install things ANYwhere other than those two. It would have been much better to install to C:\vLSO, and copy or move the required files to there, not the other way 'round.
I don't know if that's any help...
Pat☺

Paddles

  • Hero Member
  • *****
  • Posts: 721
  • Lurking around
    • vLSO blog
Re: New vLSO (Christmas edition) - EDIT
« Reply #37 on: January 23, 2017, 09:46:12 am »
2. I have been trying to get the RFN gauge to work and have not been successful. My system is P3D latest version, vLSO 0.9.8.8. I have RFN installed on a separate hard drive and vLSO shows a red light with no RFN. This last version is to support different directories for sim objects but was not tested in P3D. Is there something I can check to see why it is not showing up?

According to the RFN manual (ch. 2-4), the RFN gauge files have to be placed in the Gauge folder of a sim. That's the place where vLSO tries to look for required RFN files. If you've installed them in other folder, or even on a separate drive, then that's the reason why vLSO gives you a red light.

As for different SimObjects folders in P3D - do you practice placing you custom aircraft and boats outside of the main P3D folder? LM guys suggest doing this but it might be somewhat tricky, as you are allowed to use any of up to three simobjects.cfg, placed in different folders around your HDD...  ::) That's why this feature still was not tested in P3D.
Want it done right? Do it yourself!


cobrales

  • Newbie
  • *
  • Posts: 29
Re: New vLSO (Christmas edition) - EDIT
« Reply #38 on: March 19, 2017, 06:40:22 pm »
I just upgraded to the new vlso. Been making passes at coupville NOLF and having a blast. Great program Thanks. One question how do I get my landing bars at coupeville?

Les
« Last Edit: March 24, 2017, 03:41:56 pm by cobrales »

micpni

  • Newbie
  • *
  • Posts: 9
Re: New vLSO (Christmas edition) - EDIT
« Reply #39 on: March 24, 2017, 11:26:05 am »
Hi Les
You have two possibilities
1) Instal Nolf Coupeville vLSO compatible.
http://vlso.blogspot.fr/
or
https://docs.google.com/file/d/0B3pFCe8B4_FGUG85SE43QjNUeGc/edit?usp=sharing
In this situation RFN mode must be OFF.
2) Install RFN gauge 4.21 and RFN Scenery 4.2
http://royalefrenchnavy.restauravia.fr/RFN-Creations.htm#Gau
In this situation RFN mode must be ON.
Regards
Michel

cobrales

  • Newbie
  • *
  • Posts: 29
Re: New vLSO (Christmas edition) - EDIT
« Reply #40 on: March 24, 2017, 03:58:29 pm »
Michel

1) I have Installed Nolf Coupeville and have the FLOLS. Am I missing something or should I have ILS bars. What is tacan for KNRA?

Working on RFN Gauges......


Regards
Les

P.S.  Long day have it all working........
« Last Edit: March 24, 2017, 11:52:37 pm by cobrales »

micpni

  • Newbie
  • *
  • Posts: 9
Re: New vLSO (Christmas edition) - EDIT
« Reply #41 on: March 24, 2017, 04:22:40 pm »
To look for the problem, when VLSO is running, you must have 4 greens when RFN mode is OFF:
SimConnect.dll, Flightsim connection, Aircraft selected, location selected.
If RFN mode is ON you must have RFN in green.
Michel

micpni

  • Newbie
  • *
  • Posts: 9
Re: New vLSO (Christmas edition) - EDIT
« Reply #42 on: March 24, 2017, 07:10:20 pm »
You can find TACAN frequencies in the pdf file.
With RFN gauge, KNRA is 122X (117.50)  Rwy 32 and 122Y (117.55) Rwy 14
« Last Edit: March 24, 2017, 07:12:12 pm by micpni »

Hakadah

  • Newbie
  • *
  • Posts: 1
Re: IFOLS and P3D v3
« Reply #43 on: June 15, 2017, 06:58:32 pm »
Paddles, love the software and sceneries. I am having trouble seeing the IFOL lights at many of the FCLP bases. KNTU (uchi's scenery with your mod) KNFE...etc. What I see is the IFOLS trailor but no lights. Is there a tweak I can do or is this a P3D v3 issue?

Thanks for the help.

Axe

Paddles

  • Hero Member
  • *****
  • Posts: 721
  • Lurking around
    • vLSO blog
Re: New vLSO (Christmas edition) - EDIT
« Reply #44 on: June 16, 2017, 10:17:13 am »
Axe,
Yes, it's a P3D issue. Unfortunately there's no tweak...

The only viable solution is the RFN FLOLS, which will be fully supported in the upcoming vLSO release.
Want it done right? Do it yourself!